This machine is imported from Germany and Taiwan filling sealing
technology, after digestion and absorption, design and manufacture
Cans filling sealing device can be widely used in mineral water,
fruit juices and milk drinks cans filling and sealing. Generally
applied to aluminum cans, tin cans, PET cans filling and sealing.
Stable performance, advanced technology, beautiful shape, fully
2. the technical characteristics:
A rinse sections:
Empty delivered by the conveyor, and then transmitted to the screw
into the star wheel washer. Rinser equipped with a turntable back
along a rail magnet attracts jar flip 180 °, so Guankou down. In
rinser specific area of the empty wall for flushing. Jars by
washing, drain clip holding the bottle along the rail and then
flipped 180 °, so Guankou up. Wash the jars through the star wheel
by the rinser exported and sent to the filling machine.
Filling Part B:
Filling machine is the introduction of German technology, the use
of pressure filling principle to design and manufacture, to achieve
a good wash liquid filling jars.
High-precision mechanical valve filling valve, filling fast, level
Adopt filling valve port with guides and prop bottle lifting device
combined to ensure the accuracy of the mouth and the filling valve
seal, reducing the material from Guankou leakage phenomenon.
According cans of different heights can be achieved manually lift
to meet the filling requirements.
Used gear its high efficiency, low noise, long life, easy
maintenance, adequate lubrication, using the machine main drive
motor speed control, this machine adopts stepless frequency
Bottle guide system, simple structure, according to the pot for
quick and easy changes, the whole bottom of the tank structure care
Machine PLC automatic control, fault-line display, such as blocking
the bottle, lack of cover.
Can not open with no valves, not stamped, lack of cover shutdown
and other security features.
Automatic control of the material filling the cylinder, liquid
level detection using level sensors, liquid level to ensure a
stable and reliable filling.
Key parts of the machine and electrical components imported
C, closure part
To cover part of the lid seal the filled jars on a good product by
conveyor to the subsequent processes.
Seaming rollers hardened alloy steel with high hardness (HRC>
62), sealing the curve using the optical curve grinding precision
machining, to ensure sealing quality, to ensure the normal
operation of the machine.
The machine has a tank lower cover, no less than tank cover control
system to ensure the normal operation of the machine, reducing
cover loss rate.
Artificial cap on the aluminum cap chute by gravity and thrust ball
for the next cover, built with the chute detection switch, when
used to guarantee the lack of cover down.
Depending on the height of the pot, capping machine can be manually
lift to meet the requirements.
3. Technical parameters:
Rated output: 8000-9000BPH (310ml cans)
Can height: 80 ~ 175mm
Can Diameter: ф45 ~ ф70 mm
For tank-type: cans (200,202,206,209 need to change)
Suitable cap type: Standard Cover
Filling method: Gravity Filler
Filling head count: 18
Filling temperature: 0 ~ 92 ℃
Filling valve flow: > 150ml / s
Capping heads: 4
Motor power: 3.75KW
Compressed air consumption: 0.05m 3/min (0.6MPa time)
Dimensions: 2920 × 1850 × 2200mm
The whole machine weight: 3000Kg